Please note that the Orpheus will sit 0.25mm higher than a Standard Linn plinth - This is barely noticeable visually and if you run y. Our finger around the fitted plate you can just feel a very very slight edge.
Please inspect our pictures for how this plate will fit into your plinth once fastened down. The Kit includes all new stainless steel fasteners for the top plate including fixing hardware, top plate screws, suspension bolts and washers, including the latest motor corner bolt & also new motor adjustment bolts.. All fasteners are made from the highest quality stainless steel.. What you see in he pictures is what you will receive with the exception of the the picture of the Orpheus top plate fitted into the Vinyl Passion Master Craftsman plinth this is simply to show the quality of the fit into what are the finest quality LP-12 plinths available at a sensible price and also available from our E Bay shop.
You will also receive a pair of cotton assembly gloves to prevent marking your top plate while fitting. Fitting an LP-12 top plate correctly is highly skilled work.. For those who do not wish to fit their own kit we are happy to fit at our premises or we can supply to your local dealer. Please see our shop for a growing range of quality British manufactured accessories and upgrades at fair prices for the dedicated Vinyl lover... We will soon be offering a range of Vinyl Passion upgraded turntables through our e bay shop..
Beautiful, very solid, easy to get good bounce, and non resonant. (#331210222603) Hi Mark & all at Vinyl Passion, many thanks for what has turned out to be my Hi Fi surprise of the decade! All i wanted was to replace my Old circa 1978 scratched top plate parts are very expensive from Linn dealers in our part of the world, i never imagined the performance would take such a quantum leap forward as soon as funds allow i will be certain to try Your Unity chassis kit, keep up the good work kind regards from Canada Ken Stewart. Instruction note for Orpheus Top Plate. Refresh and upgrade your LP-12 In one cost effective package.
Your new Vinyl Passion Orpheus top plate is of the highest quality and has a delicate brushed Steel surface to match the original Linn finish. In your kit you will also find a pair of cotton assembly gloves to keep the finish pristine while assembling. Your top plate is pre formed with a slight curve to ensure perfect fitting first time providing your plinth is square. Please note that the corner motor bolt Nylock should be just tight enough to prevent the washer being turned by hand - if this bolt is over tightened you will deform the top plate.
For best results the Flange nuts correct torque should be 8-10 Nm the top plate stainless wood screws should be 1.5Nm. The flange nuts should be used to tighten the bolts to your top plate and the Nylocks to hold it in place on the plinth and to adjust the suspension.
After fitting of your top plate you should perform a tap test around the edge of the plate with your gloves on to prevent finger marks their should be no rattles and if your plinth is square and plate fitted correctly and not over tightened it will provide a perfect fit first time. We hope you enjoy your new product as much as we have enjoyed designing it and using it in our Vinyl Passion music room; as genuine enthusiasts at Vinyl Passion we greatly appreciate your feedback and if you like our products please tell your friends.